D54250WYK - speed of processor limited by system firmware?
Is anybody getting these messages in their event logs:- The speed of processor 0 in group 0 is being limited by firmware. The processor has been in this reduced performance state for xxx seconds since...
View ArticleD34010WYK memory - 8GB or 16GB?
I've just ordered a NUC D34010WYK and I think I can just use 1 memory slot? I was thinking of getting 8GB now and the other 8 later if I think I need it. The question is: do I need 16GB? Any advantage...
View ArticleRe: D34010WYK memory - 8GB or 16GB?
Hi keveen, You probably won't see a benefit from 16GB unless you do something that uses a ton of memory. 8GB is typically plenty. As for the 1 stick vs. 2 stick question you WILL see a performance...
View ArticleClik here to view.
Re: D34010WYK memory - 8GB or 16GB?
Thanks. £60 for 1 stick now. I will probably do more video editing on this faster machine. I suppose I could sell 2 4GB sticks at a later date. Still thinking. Can't wait. I'm still on a Pentium!! Does...
View ArticleRe: D34010WYK memory - 8GB or 16GB?
I went with one 8 GB stick for reliability (Lindbergh chose one engine figuring if one engine failed a second engine would only take him to the scene of the crash), and also the cost factor, less money...
View ArticleRe: D34010WYK memory - 8GB or 16GB?
I was in the same thought process. I went ahead with a single 8gb stick. My NUC is arriving tomorrow and I’ll let you know how it goes. Earlier I had an older version of the i5 nuc created with 2...
View ArticleRe: d54250wyk problem with stereo sound
Is it possible to provide the dxdiag report when using Intel® HD Graphics driver?(Windows* key + R, dxdiag, Save All Information)Thank you.
View ArticleRe: D54250WYK - speed of processor limited by system firmware?
Hi Allan, Thanks for your reply. I was already on the latest BIOS but I went through the procedure you suggested just in case. I should point out that the BIOS instructions for recovery that you linked...
View ArticleRe: NUC HTPC Sound issues
Earlier this evening I was working on my NUC and hooked it up to my home theater. To my dismay, when I use Microsoft supplied driver for audio, I get stereo. I updated it to Intel Display Audio driver...
View ArticleRe: NUC HTPC Sound issues
Your problem might be something else, try to right click on the sound icon in the task bar and select "Playback devices". Here select your receiver (mine is shown as Denon-AVAMP) and click on the...
View ArticleDC3217IYE won´t start
Hi @all. First my Setup: NUC DC32171YEMushkin 120GB SSD (MKNSSDAT120GB-DX2 x 4GB DDR (Kingston) My NUC was running well until yesterday. Afterpressing thepowerbuttonUbuntu started, butafter about 2...
View ArticleRe: NUC Kit D54250WYK memory error on bootup
Issue may be still in legal and marketing waiting on mitigate and spin decisions.
View ArticleRe: D34010WYK No UEFI Boot Devices
Betlog, did you ever figure out the issue with the NIC not reporting gigabit speeds in the BIOS? I've run into the same issue that you described with being limited to 100mb/s. It will not auto...
View ArticleD54250WYK GPU-Z showing 12750 MHz
Hi, I tried running GPU-Z v0.7.5 on the D54250WYK and the GPU clock speed occasionally shows 12750 MHz which makes no sense. It fluctuates from the 200MHz and the 12GHz...
View ArticleClik here to view.
Re: D54250WYK GPU-Z showing 12750 MHz
Try http://www.hwinfo.com/ may be more realistic. Stu
View ArticleRe: D54250WYK GPU-Z showing 12750 MHz
The numbers certainly look better with hwinfo. Thanks for the tool! I've seen Intel's BIOS screen reporting temps of ~400C on an unrelated motherboard before so I wasn't sure if this was GPU-Z or...
View ArticleClik here to view.
Re: DN2820FYKH DTS-HD?
Can you try the following Graphic drivers and let me know the results ?http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23321
View ArticleRe: DN2820FYKH DTS-HD?
DTS-HD is still not listed as a supported format, and passthrough still won't work. Is there another version of the management engine that might work?
View ArticleD54250WYK Windows 8.1 low memory error
Hi, I have the D54250WYK with Windows 8.1 and after leaving it on at the desktop doing nothing for a while, I'll get a low memory error.My setup is:Memory is Crucial Ballistix Sport 16GB...
View Article