Re: D54250WYK and Cable Matters USB 3.0 to Giganet LAN
I did update it only last week. Is there anything newer than that ?
View ArticleD54250WYKH & 1680x1024 Display Resolution
The native resolution of my monitor is 1680x1024. However, the NUC only seems to support 1680x1050, resulting in some visible serration in the displayed graphics. How can support of 1680x1024...
View ArticleRe: NUC DN2820FYKH will not display after BIOS update
Myles999, I am sorry to hear you are having problems with your new NUC, but I will be more than happy to assist you on this issue. I was reading your comment and it looks like you already performed all...
View ArticleClik here to view.
Re: DC3217IYE usb hub controller
Thanks for the picture. That is exactly what I have on my demo computer, your NUC model has only USB 2.0 ports and it will show as your picture. Please bear in mind your NUC will come with one USB...
View ArticleRe: Flickering video with D34010WYK using Windows 7 Media Center
I have reported the issue. I will reply back as soon as new information becomes available.
View ArticleRe: D54250WYKH - Can't enter BIOS after update to 0024
imwithid Thank you very much for your help. Your suggestion solved my problem right away. I have since experimented with the BIOS settings and discovered that the problem appears as soon as I disable...
View ArticleRe: D34010WYK does neither boot from USB 3.0 nor boots with plugged USB 3.0...
I'm sorry for the inconvenience that you have faced, I'm going to do my very best to help you, Steve_R.Please let me know if you are able to use your keyboard and mouse once the NUC boot to the OS?If...
View ArticleRe: nuc dn 2820 starts after usb-action
.... i always installed ram and the ssd, not more.Its a ordinary dn2820fykh.I think tests with removing WiFi and other are the part of intel pros. Whats with gurantee, if something goes wrong? Imho is...
View ArticleRe: D54250WYK shuts down with windows Aero
This behavior is very odd; we haven’t experience anything like that Pafnat.Does this issue happen with a different operating system such as windows 8 or Linux?
View ArticleRe: Haswell NUC - No Signal when switching source
I have the same issue with an Arcam AVR600 Receiver as HDMI switch connected to an Epson ETH-TW5500 Projector. I have a NUC D54250WYKH
View ArticleRe: NUC d34010wyk doesn't boot with dual monitors
Could this be related to the pin 20 in the Displayport cable? There are reports of different issues over the internet including Intel® SSDs, as you can see here:...
View ArticleRe: NUC DN2820FYKH will not display after BIOS update
Ok Myless9999, once you receive the replacement NUC, please stay on BIOS 0021 until we find a solution.
View ArticleRe: nuc dn 2820 starts after usb-action
At this point, since we haven’t received a notification saying something about a new BIOS version, I recommend you to contact our Warranty department so they can help you replacing the...
View ArticleRe: lost 1080p after upgrading bios DN2820FYKH
I tried downgrading to FY0015.BIO and FY0021.BIO but that didn't fix the resolution problem. So I upgraded back to FY0025.BIO and tried running in UEFI mode which was the default configuration for the...
View ArticleRe: nuc dn 2820 starts after usb-action
Today i tried it without the wifi, always the same effect.Sylvia, do you think the nuc is not okay or is it only a problem of the bios?
View ArticleRe: BSoD / Intel NUC D54250WYK + Haswell Graphics Drivers 6.14.10.5445
Haswell 4400 no XP/2003 driver... INCREDIBLE!!! Hi... I've recently been contacted for the upgrade of several computers in a small company (~20 PSs) After surveying the market I decided for Upgrade...
View ArticleRe: BSoD / Intel NUC D54250WYK + Haswell Graphics Drivers 6.14.10.5445
I think this should be corrected and a driver for NT5x should be provided....There are millions of PC's... that for many reasons must operate with this OS's... ZEE
View ArticleRe: DN2820FYKH Availability
Hi all, Let me assure you that the DN2820FYKH has NOT been discontinued. It has just been jumping off the shelves faster than we can keep up. In regards to the processor change - yes - there is going...
View ArticleRe: IR keyboard for ubuntu?
Hi jonskar, we provide support for Intel® NUCs with Windows* operating systems but the information from this discussion may help you: http://forums.overclockers.com.au/showthread.php?t=1074327
View ArticleRe: BSoD / Intel NUC D54250WYK + Haswell Graphics Drivers 6.14.10.5445
IBIT.ZEE, I can certainly sympathize with your situation but I doubt there will be an official Windows XP driver released for the NUC. I'm not involved with development, but given the fact that...
View Article