Re: NUC Haswell reboots after shutdown
Hi, Lois. It was not broken in the BETA version, this behaviour was also present in v0025. BR
View ArticleDual boot OpenELEC and Android ?
Hello, I have an Intel NUC i3 haswell, i managed to boot android 4.4.2 android-4.4.2_r1-ia1 | 01.org from an usb drive. I want to make a dual boot with OpenELEC and Android on a SSD disk, how can I do...
View ArticleRe: NUC HTPC Sound issues
I have the same issue and have tried your solution. However, i'm still not sure that everything is correct. Here a screenshot of my device manager. Should there really be two audio devices like it is...
View ArticleRe: NUC Haswell reboots after shutdown
I get the same problem when I try to change something in my BIOS
View ArticleRe: NUC HTPC Sound issues
Hi Emil889, Your screen shot looks exactly right. Remember, the NUC has both an on-board audio device (the audio jack uses it) and HDMI audio. So you should always have two. Jason
View ArticleD54250WYK seems to be bricked
I've just got a D54250WYK with - Crucial 8GB DDR3 1600 MT/s CL11 SODIMM 204 Pin 1.35V/1.5V Memory Module and - Plextor PX-256M5M 256GB M5M Series mSATA 6GB/s 512MB DDR3 JEDEC MO-300/Ultrabook...
View ArticleClik here to view.
Re: DN2820FYKH Availability
Contrary to all the Intel staff comments, these seem to have gone the way of the dodo bird. I checked with four Canadian and two US national dealers who sell Intel products and the NUCs in particular....
View ArticleRe: D54250WYK seems to be bricked
Nice SSD , same as mine. Have you tried this?When the Intel® NUC is off, press and hold the power button for approximately 3 seconds and then release it. The Power Button menu should appear. Press F2...
View ArticleRe: D54250WYK seems to be bricked
Yes - 3 seconds was the secret - I was just stabbing the power button. Now I can try another install. Thank you
View ArticleRe: Haswell NUC - No Signal when switching source
I have just bought the new 34010 today and have had a nightmare so far. All the years of building PC's and I've never had problems like this. I set the machine up in the back room with the machine...
View ArticleRe: Haswell NUC - No Signal when switching source
Welcome to the club, "toptrumps"! This Bug does not exist, until God himself has comfirmed it! How can this thing work out? Thats not Intels problem...
View ArticleWiFi not working at all
Just assembled a new NUC D54250WYKH2 with Win 8.1 Pro and the N 6235 WiFi/BT adapter.It's my 2nd NUC and I had no problems getting it to work.However, I simply can't get the WiFi to work. It says that...
View ArticleRe: DN2820FYKH no USB mouse after sleep (under Debian 'Jessie')
I can fix the problem by going to BIOS 0028, but it comes back when I upgrade to BIOS 0032 again. So here is my history:in BIOS 0032, mouse freezes after sleep, revert to 0028in BIOS 0028, mouse does...
View ArticleClik here to view.
Re: WiFi not working at all
I wonder why you use 2 Access Points. ½ a meter may be too close.Try with only one AP and move it a few meters away.
View ArticleRe: NUC Kit BOXD34010WYKH1 would not boot if ethernet is disabled
Have you try to update the BIOS to the next available version?Also update the network driver to the latest one? If the issue persists and if the NUC is still under warranty please get in touch with...
View ArticleIs it possible to upgrade my case from D54250WYK to D54250WYKH for an...
I'm aware that there are numerous third party enclosures available, fanless etc for the D54250WYK, but is it possible to upgrade my original Intel case from D54250WYK to D54250WYKH for an internal HD ?...
View ArticleRe: Haswell NUC - No Signal when switching source
Hi all, I apologize for the delay on this issue. I checked back and found that the engineering team was never able to reproduce this issue on the switches they tested. Let me follow up on that, as they...
View ArticleRe: D54250WYK seems to be bricked
It is good to know it is working and thanks for the information you have provided, I am sure it will be helpful for other customers.
View ArticleRe: Checking if NUC-D34010WYKH is working
That is a pretty good recommendation. Please check if your cable is OK.You can also try testing another monitor.
View ArticleRe: NUC fan problem-high temperatures-simple mechanical fix-pictures included
Thanks for the information KirkDrage.
View Article